We have commercial rated fire doors with both Wired Glass & Clear High Temperature Fire Rated Glass options available to meet most fire code requirements. Glass can be a great way to add additional safety to a hallway, stairwell or other corridor requiring fire protection.
Commercial Fire Rated Doors With Louvers
Fusible link louvers are a great way to add additional ventilation to a room or closet door that would otherwise be closed off to maintain the integrity of the firewall. Our commercial fire rated doors with louvers can also be used on a mechanical closet to seal off the room in the event of a fire.
We keep Commercial Fire Rated Wood Doors & Steel Doors in stock.
CDF carries the largest selection of commercial fire rated doors in the industry. We keep the most popular sizes of both fire rated hollow metal doors and fire rated wood doors in our warehouse available for super rush shipping to your job site. CDF also has fire rated glass and louver options to meet any firewall requirement.
Commercial fire rated doors are widely recognized as the best value in the door industry. Most steel doors outlast their wood counterparts by over 10 years, are better insulated, vandal resistant, and longer lasting than wood doors or fiberglass doors. These doors are most commonly used on the exteriors of a commercial building, and on fire rated openings as they are inexpensive, and can handle ratings up to 3 hours.
Our fire rated commercial steel doors are made using a hollow metal shell that is then re-enforced and filled with insulation. Our doors are supplied from manufacturers that meet the strict guidelines of the steel door institute, as well as testing from Underwriters Laboratories (UL), National Fire Protection Association (NFPA), American National Standards Institute (ANSI), and American Society for Testing and Materials (ASTM)
Our fire rated doors are commercial grade and can withstand the spread of fires to the architectural grade standard fire rating of 90 minutes. We carry fire rated commercial doors with custom options including stain finishes, sizing, and non-existing hardware. The most common application for a fire rated door include commercial openings needing to meet code requirements or any opening that needs to be protected from a potential fire hazard from spreading.
All commercial doors come at a thickness of 1-3/4". We offer the industry's leading standard widths and heights for your openings. We provide cut down and restyling for custom sized doors to meet any custom opening. Be sure to review our width and height sizing chart before building your quote. If you have any further questions please contact us.
20 minute, 45 minute, 60 minute, 90 minute and 3 Hour Fire rating
ANSI Standards
Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8
Optional Preps
Exit Device Trim, Deadbolts, Lite and Louver Cutouts, Continuous Hinge Application (Undersized Width)
Door Finish
Factory-Applied, Baked-On, Rust Inhibiting Gray Primer (No Special Color Options) – Not intended to be a finish coat. It is recommended that finish paint (topcoat) be applied after installation
Reinforcements
Heavy Gauge Door Closer and Hinge Reinforcements
Channels
14-Gauge Inverted Top and Bottom Channels, Optional Flush Top Cap
